3000C Vinyl Banner Welder | Edge Hemming Machine | Vinyl Grooving Machine

3000C Vinyl Banner Welder | Edge Hemming Machine | Vinyl Grooving Machine

Model: Top 3000C

Rated Voltage: AC220V

Power: 1800W

Frequency: 50-60Hz

Net weight: 13kg

Gross weight: 15kg

Temperature range: 20-700°C

Welding width: 2-3cm

Welding thickness: 0.2-1.5mm

Speed: 0.5-8m/min

Packing size: 49*29*29cm

Size: 40*20*25cm

Equipped with Leister heater, temperature fluctuation ±1°C

Special instructions:

1.  Turn off machine: Firstly turn off heating switch, make sure actual temperature below 50℃, then turn off power switch.

2. Sudden power failure during welding: pull out heat gun quickly while connect power.

Note: Heating element could be damaged from incorrect operation.

Operation instruction / Tips:

1. Connect ground wire – ensure operation stable, reduce failure rate.

2 .Clean air input timely – can make heat gun lifespan longer.

3. Clean nozzle timely – can make welding result perfect.

4. When under dormancy status, press “reset” or tune the machine to walk status which can re-start the machine.

5. Please read instruction carefully before use welder.