3400B Vinyl Banner Welder | Edge Hemming Machine | Vinyl Joint Machine

Special instructions:

1.  Turn off machine: Firstly turn off heating switch, make sure actual temperature below 50℃, then turn off power switch.

2. Sudden power failure during welding: pull out heat gun quickly while connect power.

Note: Heating element would be damaged from incorrect operation.

Operation instructions / Tips:

1. Connect ground wire – ensure operation stable, reduce failure rate.

2 .Clean air input timely – can make heat gun lifespan longer.

3. Clean nozzle timely – can make welding result perfect.

4. When under dormancy status, press “reset” or tune the machine to walk status which can re-start the machine.

5. Please read instruction carefully before use welder.