3000C Vinyl Banner Welder | Edge Hemming Machine | Vinyl Grooving Machine
Model: Top 3000C
Rated Voltage: AC220V
Power: 1800W
Frequency: 50-60Hz
Net weight: 13kg
Gross weight: 15kg
Temperature range: 20-700°C
Welding width: 2-3cm
Welding thickness: 0.2-1.5mm
Speed: 0.5-8m/min
Packing size: 49*29*29cm
Size: 40*20*25cm
Equipped with Leister heater, temperature fluctuation ±1°C
Special instructions:
1. Turn off machine: Firstly turn off heating switch, make sure actual temperature below 50℃, then turn off power switch.
2. Sudden power failure during welding: pull out heat gun quickly while connect power.
Note: Heating element could be damaged from incorrect operation.
Operation instruction / Tips:
1. Connect ground wire – ensure operation stable, reduce failure rate.
2 .Clean air input timely – can make heat gun lifespan longer.
3. Clean nozzle timely – can make welding result perfect.
4. When under dormancy status, press “reset” or tune the machine to walk status which can re-start the machine.
5. Please read instruction carefully before use welder.
| Deliver to |
Postage |
Additional Units |
Pick up
|
$0.00 |
$0.00 |
| Major cities
|
Quote**
|
Quote**
|
| Other locations
|
Quote**
|
Quote** |
* All Prices are GST exclusive, View our shipping policy.
* Please contact for freight cost if the above table shows Quote**.
