3000A Semi-Automatic Banner Welder | Edge Hemming Machine | Vinyl Grooving Machine

3000A Semi-Automatic Banner Welder | Edge Hemming Machine | Vinyl Grooving Machine

This Semi-automatic banner welder is designed to weld PVC banner material, small, light and easy to operate.

Feature:

-Equipped with temperature feedback sensor

-Constant temperature control ensures stronger welds

-Advanced PID control technology

-Adjustable speed and temperature

-Adjustable air flow

-Economically priced

-Suitable for most banner materials

Equipped with Leister heater, temperature fluctuation ±1°C

Specification:

-Model: LC-3000A

-Rated Voltage: 110V/220v

-Power: 1300W

-Frequency: 50-60Hz

-Net weight: 14kg

-Gross weight: 15kg

-Temperature range: 0-620°C

-Welding width: 2-4cm

-Welding thickness: 0.1-1mm

-Speed: 1-15m/min

-Cerificate: CE, ROHS

-Display Screen: LED

-Size: 49*30*29cm

Special instructions:

1.  Turn off machine: Firstly turn off heating switch, make sure actual temperature below 50℃, then turn off power switch.

2. Sudden power failure during welding: pull out heat gun quickly while connect power.

Note: Heating element could be damaged from incorrect operation.

Operation instruction / Tips:

1. Connect ground wire – ensure operation stable, reduce failure rate.

2 .Clean air input timely – can make heat gun lifespan longer.

3. Clean nozzle timely – can make welding result perfect.

4. When under dormancy status, press “reset” or tune the machine to walk status which can re-start the machine.

5. Please read instruction carefully before use welder.

Please send us an enquiry for freight cost.